Hardware
This topic lists various hardware devices that are supported in the X-Start kiosk terminal.
CPU Module
|
Part |
Description |
|
DFI ADN173 (Part # SA7187) |
Motherboard with serial connections passed through ports mounted on the module cover; all other connections (display module, Watchdog) are USB. |
Display Module
|
Part |
Description |
|
DRB Display Module (Part # SA7186) |
Left side connections include: - Power harness (12V DC and 24V DC power supply from the power module) - Audio (from the CPU module, volume control pot right above) - Intercom harness (speakers, door switch) - Paper-low sensor cable connection Bottom connections include: - USB connection to CPU Module - USB connections for barcode reader and receipt printer - Power harness (supplies power to all door devices via interconnects) - HDMI |
Control Module
|
Part |
Description |
|
DRB Control Module (Part # SA7188) |
16 wash outputs (8 supported currently in software) Wash equipment signals (WIU, WIS, WC) Availability light (DPDT) Spare outputs (fault outputs Light control (door and topper) |
Payment Card Readers
|
Part |
Description |
|
Invenco FlexPay 6 (A2-05) |
Point-to-Point (P2P) Encryption EMV Processor support through Invenco PCI PTS 6 Compliant |
|
PAX IM30 |
End-to-End Encryption (E2EE) EMV Processor support through Fiserv PCI PTS 6 Compliant |
Power Supply
|
Part |
Description |
|
Power Supply Module (w/ Watchdog) (Part # SA7185) |
Power supply component with Watchdog power management and recovery system. |
Receipt Paper
|
Part |
Description |
||
|
DRB Receipt Printer Paper (Part # OM1628) |
White thermal sensitive paper with thermal coating. Width: 60mm Diameter: 100mm |
||
Updated: 051426